Height For Shower Controls

Shower controls should be placed at a height 40 50 102 127 cm above the shower floor and out of direct line of the water path to avoid being caught in extremely cold or hot water when operating.

Height for shower controls. Place the controls so that all users can easily access them. For shower stalls install the valve at the standard height of 48 inches or 4 feet. In transfer type shower compartments the controls faucets and shower spray unit shall be installed on the side wall opposite the seat 38 inches 965 mm minimum and 48 inches 1220 mm maximum above the shower floor and shall be located on the control wall 15 inches 380 mm maximum from the centerline of the seat toward the shower opening.

I find if you have a shower valve fitted over the bath then 1300mm off the floor is a good height. Looking up local building codes is a great starting point if you want to install your shower valve at the right height. Take into consideration whether the controls work the tub and shower since you ll want to mount them lower to accommodate tub users.

The architect is given a 10 inch leeway to place the controls. Install faucets at the same height as the valve equidistant from the valve. Showerheads should ideally be high enough for users to stand comfortably underneath but not so high that the water hits the wall in front of you.

If valve is over a shower tray in a cubicle then around 1m from top of shower tray. The average height is 200cm but this should generally be about one foot. The maximum height above the floor is 48 inches.

A height of 28 inches or 2 feet 4 inches is standard for valves in bathtub shower units. Shower heads are located at a standard height of 80 203 cm but can be set at a minimum height of 72 183 cm if desired. Shower height whether your shower is installed above your bath or is a stand alone model with a shower enclosure there are a few rules of thumb for getting the right height.

Standard height for the shower valve the handle that turns the shower on can be roughly waist high 36 inches above the shower floor or as high as 48 inches. As long as the controls are within 38 to 48 inches off the floor the stall is in compliance. Shower valve and spout height is a matter of personal preference when you re building or retrofitting.